2U 19'' Rack AC-DC 360AS switching dc125v power supply 1500w Waterproof In Outdoor

Categorías de productos

Productos destacados

48VDC &220Inversor paralelo modular VDC sin batería inversor de onda sinusoidal pura 3kW inversor modular
19 Pulgada 110vdc & 220VDC Manual del inversor paralelo de la fuente de alimentación del inversor paralelo del usuario
DC 48V 10000 Watt Inverter 10kva Pure Sine Power Inverter Telecom 4u Rack Mount Inverter
Sistema de alimentación integrado 3U DC 48V 150A Fuente de alimentación de conmutación
BWITT de una sola fase 48V a AC220V 1000W Pure Sine Wave Inverter 1000W inversor con SNMP

Contáctenos

Copyright @2025 Shenzhen Bwitt Co., Limitado
Teléfono:+86-18820237701
Whatsapp：+86 18822867573
Correo electrónico:support@bwitt.com.cn
DIRECCIÓN:9 / F, Edificio 20, Parque industrial de ciencia y tecnología de Arex, 19 East Huifeng Road, Zhongkai Zona de alta tecnología, Ciudad de Huizhou, Provincia de Guangdong

2U 19” RACK AC-DC 360AS Cambio de alimentación DC125V 1500W impermeable al aire libre

Telecom Rectifier System telecom rectifier

Ver más fotos

Descripción:

El sistema rectificador modular es un sistema de potencia modular extra capaz basado en bloques de construcción para ambos 19 soluciones de sistema en pulgadas.

Consiste en un módulo rectificador. & monitor de control & 19''estructura.

- +

Agregar a la consulta 0

- +

Agregar a la consulta 0

- +

Agregar a la consulta 0

Envíenos un correo electrónico Contacto ahora

Detalle del producto

Parámetros

Consulta ahora

2U 19'' Rack AC-DC 360AS switching dc125v power supply 1500w Waterproof In Outdoor

Descripción

El sistema rectificador modular es un sistema de potencia modular extra capaz basado en bloques de construcción para ambos 19 soluciones de sistema en pulgadas.

Consiste en un módulo rectificador. & monitor de control & 19''estructura.

This rectifier system 90~290 Vac Single phase AC supply voltages into stable nominal 110VDC voltage adjustable to the needs of the application.

Todas las versiones ofrecen opciones para alarmas y sondas de temperatura de la batería..

Características :

1. Hot swappable type operation;
2. Each individual rectifier module can be capable of operating independently;
3 .AC /DC distribution system for AC input/ DC output distribution and protection;
4 .Protections: short road, over load, Batería sobre/bajo protección de voltaje.

Etiquetas：

Previsamente

Single-phase static switching module with dual input 8KVA power level 500map sts static transfer

Professional 1600W power inverters Rack mount 2kva 48V inverter for Outdoor Emergency

Envíenos su mensaje:

Recomendación del producto

No.	Item		Technical Specifications
1 2	Environmental Requirements	Operating temperature	-40℃~55℃(-40 a +131 ° F)
		Storage temperature	-45℃~70℃ (-40 a +158 ° F)
		Relative humidity RH	5%~95%RH（40±2℃，no condensation）
		Atmospheric pressure	62kPa~106kPa
		Altitud	0m~2000m
		Degree of protection	IP20
	Aporte	Input mode	Single phase input
2		Input voltage	220Vacaciones
		Voltage range	90V ~ 290VAC
		Frecuencia	45 Hz ~ 65Hz
		System efficiency	≥93.2% （@230Vac，Peaking）
		System input power factor	≥0.99（@230Vac，full load）
		Thd	＜5% （@230Vac，full load）
		System protection function	AC overvoltage& under-voltage protection; DC overvoltage&under- voltage.current limit.short circuit protection; battery and rectifier over temperature protection; automatic restoration happens after the over-voltage.over-current.under-voltage and over-temperature disappear.

3	DC Distribution	System output voltage	Rated output：125VDC
		System output voltage	Adjustable range: 90VDC-150VDC continuously adjustable
		System output current	125V/20A
		System load regulation	≤±0.5%
		System voltage regulation	≤±0.5%
		System stability precision	≤±0.5%
		Current sharing capability	module current sharing not more than ±5％
		Phone balance weight noise	≤2mV（@230Vac，full load）
		Peak-peak noise voltage	≤200mV(0 MHz ~ 20MHz) （@220Vac，half load ~ full load）
		system current limit value	Power system: 1-22A，Nota: can be settable continuously
		System voltage drop	At full load. the voltage drop of DC distribution within the rack shall below 500 mV
		Output distribution	Load distribution:3@ 135A Rail Mount Terminal
		Battery distribution	Battery distribution：1*@135A Rail mount Terminal
4	Module And Monitoring Unit	Rectifier hot-swap	Hot-swap available.not influencing system operation
		Rectifier indication	with operation.alarm.and fault indicators
		Soft start time	3s-10s
		rectifier fault influence	Not influencing the set parameters of rectifier when rectifier at fault
		Remote monitoring	With remote metering & remote control & remote signaling functions. providing standard RS485&TCP/IP Interface and 6 sets of the dry contact output port & Battery Temp.Sensor
		Monitoring unit	English language in LCD screen of the rectifier,
		Monitoring unit	The parameters can be set through the monitoring unit. with parameter set and power-failure data store functions. máx. 1000 Units vents.
		Installation method	Rectifier module support swappable
		Remote control	rectifier start and close.battery test. equalize and float charging ,DIN /DO configuration and so on
		Alarm functions	With AC over voltage/under voltage.DC voltage over/under.module Communication fault and over temperature alarm,Battery remove,Surge and so on
5	Safety	Insulation resistance	Testing voltage 500VDC， Insulation Resistance ≥10M (normal atmospheric pressure, normal temperature, relative humidity <90%, no condensation)
		Insulation strength	Input to output: 3500VDC @1min&leak current ≤10mA
			Input to enclosures: 3500VDC @1min&leak current ≤10mA
			Output to enclosures:750VDC @1min&leak current ≤10mA
		System leak current	≤3.5mA（220Vac input）
		Grounding performance requirements	The system with operating ground and protection ground.with clear mark.the resistance between the enclosures of distribution and all palpable metal components and grounding nut is not more than 0.1Ω
		AC lightning protection	The equipment AC side can bear simulated lightning impulse Current of waveform 8/20μS and rated amplitude 40kA.(Opcional)
		EMC	In accordance with EN55022 CLASS A,GB9254 CLASS A,FCC PART15 CLASS A,GB17626-1998,IEC 61000-3-2
6	Batty	Battery low voltage alarm and protection （BLVD）	When DC voltage below battery protection threshold value and there is no AC input. the battery protection alarm.lasting for 1 min.battery protection DC connect cut off.
6	Batty	Battery management function	With battery management function; with the function of the manual or automatic shift of equalized or float charging status of the battery.current limit charging at equalized state; Temperature compensation for the system output voltage,(equalized and float voltage can be adjusted automatically based on 1~2 00（adjustable）mV/cell/℃.the higher the battery temperature.the lower the float voltage.).

7 7	others	Ruido	≤55db (A) (measured at 1m distance from the equipment)
		MTBF	≥ 100000 horas
		Impact and vibration	1. Can bear impact of peak acceleration 150m/s2 lasting for 11ms
		Impact and vibration	2. Can bear sine wave vibration of frequency (10 ~ 55)Hz and amplitude 0.35mm.
		Material flame retardant performance	1.The flame retardant class of PCB used in system and module controller meet V-0 requirements of GB4943.
			2.UL certificated flame retardant cable is adopted.
			3.The flame retardant class of insulation materials meets V-1 requirements of UL regulations.
8	Mechanical Data	Chassis coating	Meeting damp-proof and corrosion-proof requirements.there is a surface coating on the enclosures. which meets below requirements:
			1. Making the adhesion test in accordance with ISO 2409. reaching 0 class.
			2. Making a pencil hardness test in accordance with ASTM D3363.not less than 2H.
			3. Making impact test in accordance with ASTM D2794.reaching 50kg.cm.
			4. Making salt frog
		Cabinet material	Material: CRCA ; thickness:1.5mm
		Dimensiones (W×D×H)	Cabinet: 468mm×380mm×132mm (W×D×H)
		Peso (kilos)	Appro: 15kilos